TIPD161: schematic is inconsistent with the PCB

Amy Luo

Part Number: TIPD161
Other Parts Discussed in Thread: XTR105

Hi team,

Our customer found that the schematic of the reference design tipd161 is inconsistent with the PCB . I'd like to confirm which is correct?

over 3 years ago

0 Amy Luo over 3 years ago

TI__Expert 6890 points

Hello, Can anyone confirm it for me?

0 kai klaas69 over 3 years ago in reply to Amy Luo

Guru 140200 points

Hi Amy,

I heavily doubt that the tiny BAS70 will survive a 10A Surge current...

Kai

0 kai klaas69 over 3 years ago in reply to kai klaas69

Guru 140200 points

Kai

0 Katlynne Jones over 3 years ago in reply to Amy Luo

TI__Mastermind 25513 points

Hi Amy,

I'm sorry this thread was not assigned to our group. Your second post made it through to us because you used the tag XTR105. It looks like there is a mistake in the Design Files. If you look at the schematic that's posted on page 20 of the Design Guide, it matches the PCB layout. They must have not saved the correct schematic when they posted the Design Files.

Sensors

Sensors forum

TIPD161: schematic is inconsistent with the PCB