I am trying to compile the mmw_sdk with the code downloaded from industrial toolbox 1.6.2 SDK 1.2 CCSV8
when compiling mmw_dss I get an error that the file dss_resources.h is missing.Can anybody email it to me.
John, Cesar,
I have started with a new machine.
Installed SDK 1.2
Instlled CCS 7
Industrial toolbox 1.6.2. Imported the mmW-sdk project and I get exactly the same error.
1. The file is missing dss_resources.h
There is nothing to do with any tools or anything else. The file is included and does not exist on my file system anywhere. It may be a packaging problem. Can you find the file and email it to me?
Also when I try to compile the mmv_mms project it tells me that the "endianess" is not defined.
Is there a different version of the industrial toolbox that can be imported and works straight out of the box?
There must be a -D directive somewhere which I can probably put myself. However I would like to start with a TI project that compiles.
You can look at the bottom of the Labs overview page of the latest Industrial Toolbox release (v2.4.0) to see which previous version of the Industrial Toolbox should be used to find labs that support IWR1642BOOST ES1.0 EVMs. For example, if you are trying to run the mmWave SDK out-of-box mmw demo you should select Industrial Toolbox v2.3.0 (and use mmWave SDK v1.2.0.5) as shown in the pic below.
http://dev.ti.com/tirex/#/?link=Software%2FmmWave%20Sensors%2FIndustrial%20Toolbox%2FLabs
Instructions for accessing previous Industrial Toobox versions are given at the bottom of the main Industrial Toolbox overview page.
http://dev.ti.com/tirex/#/?link=Software%2FmmWave%20Sensors%2FIndustrial%20Toolbox
Regards,
John
