TS5A22364-Q1: Can this support i2s?

This device has a specified analog bandwidth of 18.3 MHz. So you would be able to use digital signals at up to about 2 MHz. Is this enough for your I2S?

You can use any general-purpose switch that supports the desired voltages and frequencies. Assuming that you need three channels, you could use the SN74LV4053A-Q1 or SN3257-Q1.

Hello Frank,

I2S is a 3-wire push-pull protocol, therefore a 3-channel device is needed and the TS5A22364-Q1 has only 2 channels. It cannot be used in I2S applications. 

I can suggest the SN3257-Q1: https://www.ti.com/lit/ds/symlink/sn3257-q1.pdf?ts=1701115028347&ref_url=https%253A%252F%252Fwww.ti.com%252Fproduct%252FSN3257-Q1

It is an automotive grade 2:1 switch.

If you have any other questions or concerns about I2S switches we have an FAQ about it: https://e2e.ti.com/support/switches-multiplexers-group/switches-multiplexers/f/switches-multiplexers-forum/1100279/faq-what-analog-switch-multiplexer-should-i-use-for-i2s-applications 

Thanks,

Nir