Hi,
Is it OK to float if not used with the following pins?
・ A: B: C [0-1] IN/OUT pin
・ COM A: B OUT/IN pin
Best regards,
Yuto Sakai
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Hi,
Is it OK to float if not used with the following pins?
・ A: B: C [0-1] IN/OUT pin
・ COM A: B OUT/IN pin
Best regards,
Yuto Sakai
Only digital inputs require a valid logic level at all times.
The A/B/C 0/1/COM pins are designed for analog signals, and are allowed to float.