MUX509: Do you have any data about On-resistance drift except VS=10V case?

Hi Kazuya,

I'm looking for these data in our database. In your post you mention Ron drift at Vs=10V, I only see Vs=0V.
Which data are you referring to from the datasheet:

Thank you and best regards,

Ambroise

 Hello Ambroise,

 Thank you very much for your reply and I'm sorry to confuse you because of my wrong question.

 The customer wants to know about "On-resistance drift" in condition of VDD=12V and Vss=0V as the follow.

  The on-resistance drift is 0.47%/degree C when the source pin voltage (VS) is 10V.

 Do you have any data of on-resistance drift when VS is other voltage (for example, Vs=15V,20V or 30V)?

 Or is the on-resistance drift not depend on VS?

 Or is the on-resistance drift by device variation bigger than VS condition?

 Thank you again and best regards,

 Kazuya.

Hi Kazuya, 

Thank you for the confirmation, unfortunately we don't have the data at hand. 
We'll have to measure these properties in the lab, expect results by the end of next week.

Thank you and best regards,

Ambroise

 Hello Ambroise,

 Thank you very much for your strong supports.

 I'm looking forward to receiving the data you took.

 Thank you again and best regards,

 Kazuya.