• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 53 subscribers
  • Views 1339 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Error gmake no rule to make target 'all' and Error gmake no rule to make target 'clean'

NURUL ASYIKIN MOHD ABD ROKHIM
Prodigy 10 points


Hai,

I tried to rebuild the water vs ground lab demo but there was showing an error as:

 "C:\\ti\\ccsv8\\utils\\bin\\gmake" -k -j 4 clean -O

gmake: *** No rule to make target 'clean'.

"C:\\ti\\ccsv8\\utils\\bin\\gmake" -k -j 4 all -O

gmake: *** No rule to make target 'all'.

How can I solve this problem? I use CCS version 8.3.1 and use mmWave industrial toolbox version 3.6.2

  • 0
    TI__Mastermind 23725 points

    Hello

    These  demos are deprecated and  are not actively maintained, for current supported demos please see the latest industrial toolbox.

    Having said that  if you  have the older version of toolbox and the SDK compiling steps should work so:

    1. Please make sure if you have all mentioned dependencies resolved and then attempt the compile

    2. In order to run the demo you do not need to compile it as images are provided in the lab to  run the demo.

    Please let us know if  that worked for you.

    Thank you,

    Vaibhav