CODECOMPOSER: CCS sometimes takes a long time to launch a debug session or to flash the MCU

Nick Masur

Part Number: CODECOMPOSER

Sometimes CCS has a long delay between compilation and launching debug/flashing the MCU. The progress bar hangs at 95% for upwards of 20 seconds with no apparent reason.

Doesn't happen every time, but once it starts happening, it continues to happen for a while. System restart sometimes removes the delay.

CCSv11.0.0.00012

over 3 years ago

0 Ki over 3 years ago

TI__Guru**** 451431 points

Hello,

Assuming you are on Windows, can you zip up the following folder:

C:\Users\<username>\AppData\Local\Texas Instruments\CCS\ccs1100\0\dmp

And attach it to this thread?

Also try some of the troubleshooting tips in:

https://software-dl.ti.com/ccs/esd/documents/users_guide/index_troubleshooting.html

Specifically 9.4.2, 9.4.3, 9.7.3, 9.7.4, 9.7.5

Thanks

0 Nick Masur over 3 years ago

Prodigy 205 points

Hello, Ki.

Could that memory dump contain proprietary information? I'd prefer to direct message it to you if so.

Looking at the troubleshooting guide now.

Thanks,

Nick

0 Ki over 3 years ago in reply to Nick Masur

TI__Guru**** 451431 points

I could have some path information and maybe names of source files. Feel free to start a private E2E conversation and attach it there.

Thanks

0 Ki over 3 years ago in reply to Ki

TI__Guru**** 451431 points

This issue was resolved off-line.

For those following this thread, the issue was related to the XDS debug probe connected to a USB hub (without separate power). Some USB hubs can impact reliability of XDS debug probes. In those cases, it is recommend to connect the probe directly to the computer.

Code Composer Studio™︎

Code Composer Studio forum

CODECOMPOSER: CCS sometimes takes a long time to launch a debug session or to flash the MCU