Regarding Stellaris LM3S3748 with XDS510 USB PLUS EMULATOR

Dharmendra Singh

Other Parts Discussed in Thread: LM3S3748

Hi all,

I am trying to connect Stellaris LM3S3748 Eval Kit with XDS510 USB PLUS Spectrum Digital Emulator. Emulator Loading the GEL file and Initializes memory map but when I am trying to connect to Target some error " Error: 0x80000240/-140, Fatal Error : Initialization ,OCS, generated by SD SCAN CONTROLLER " is coming . Plz help me what to do.

Regards,

Dharmendra

over 11 years ago

0 AartiG over 11 years ago

TI__Guru**** 173310 points

Are you using the appropriate adapter and/or appropriate setting in the target configuration for using Stellaris with XDS510USB emulators?

Please refer to the following wiki pages for specific pointers:

http://processors.wiki.ti.com/index.php/JTAG_configuration_for_CCS_and_Stellaris#External_Emulator_Connection
http://processors.wiki.ti.com/index.php/Stellaris_Emulator_Compatibility#Compatibility_Table

I just tested connecting to a LM3S3748 evaluation kit with a Spectrum Digital XDS510USB (not Plus) using the TMDSADPEMU-20A adapter (with pins 9 and 11 shorted as mentioned in the wiki page) and was able to connect without problems.

0 Dharmendra Singh over 11 years ago in reply to AartiG

Prodigy 20 points

Hi Aarti,

Thanks a lot for suggesting the solution . Now I am able to work on the kit and I want to thanks , TI for creating this very nice engineers interacting site.

Code Composer Studio™︎

Code Composer Studio forum

Regarding Stellaris LM3S3748 with XDS510 USB PLUS EMULATOR