Hi three,
I am trying to program MSP430G2101 using UniFlash:
However, it fails to bring GUI and stuck on this window:
Any suggestions?
Thanks.
Stan
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Hi three,
I am trying to program MSP430G2101 using UniFlash:
However, it fails to bring GUI and stuck on this window:
Any suggestions?
Thanks.
Stan
Stan,
There seems to be a metadata issue on the G2101 and a few other MSP430 devices. We will look into fixing this issue in the next UniFlash release.
In the mean time, please try replacing the attached dinfra_resource.json.gz with the one in your installed directory 'deskdb' folder (backup the original just in case).
This should fix the issue on the MSP430G2101. Let me know if this workaround works for you.
Thanks,
Ricky
Hi Ricky,
Thanks, it helped. Now Uniflash seems to be working with MSP430G2101. However, it looks like the tool still has the same problems with the other G series devices. Hope it is going to be fixed in the next release.
Stan