• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 53 subscribers
  • Views 342 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

CCS/MSP-TS430DA38: MSP430F2252

siranjeevi mahadevan
Intellectual 330 points
Part Number: MSP-TS430DA38
Other Parts Discussed in Thread: MSP430F2252

Tool/software: Code Composer Studio

hi sir, 

     i want to know about excution time of ccs using msp430f2252 can you help sir,

thanking oyu

siru

  • 0
    TI__Guru**** 450031 points
    Hello,
    I assume you are asking about profiling on your device. The best option is to use the profile clock:
    software-dl.ti.com/.../ccs_counting_cycles.html

    Please note that the profile clock does use an emulation resource. If enabled, this will limit the number of HW breakpoints available. If too many GW breakpoints are set, you will not be able to enable the clock.

    Thanks
    ki