CCS/MSP430F5152: compile question

Rui You

Part Number: MSP430F5152

Tool/software: Code Composer Studio

Hi Team,

My customer needs support about the CCS compiling. Could you please help to check the questions below and help support? thank you!

1. When using CCS9.2 IEC environment to compile the MSP430 sample code, customer got a .out file. How can the .out file convert to the .txt?

2. ULPMC_FW_UPDATE.efi is a tool to update the firmware. This tool runs under UEFI Shell envinronment. Can TI provide the update tool under Windows OS?

Thanks,

over 4 years ago

0 desouza over 4 years ago

TI__Guru**** 168703 points

Rui,

1. Check section 3.1.6 of the CCS IDE for MSP430 User's Guide at:

www.ti.com/.../slau157ar.pdf

2. I am unsure what this tool is - I can't find anything in our software catalog. Perhaps it is a proprietary tool from your customer.

I will forward this thread to the group that may be aware of this updater.

Hope this helps,

Rafael

0 Gary Gao over 4 years ago in reply to desouza

TI__Mastermind 33975 points

Hi Rui

I have not use the ULPMC_FW_UPDATE.efi before, where you download it? Is it developed by TI?

Why use the ULPMC_FW_UPDATE.efi? Does the customer just want to download the firmware to the device? We have lots of methods to do this by the PC. You can use 4 wire JTAG or SBW or BSL to do this. And we have lot of software and hardware to support this.

Best regards

Gary

0 Gary Gao over 4 years ago in reply to Gary Gao

TI__Mastermind 33975 points

Hi Rui

Do you have resolve your problem? Any update about it?

0 Gary Gao over 4 years ago in reply to Gary Gao

TI__Mastermind 33975 points

Hi Rui

I will close the thread first and if you want to discuss the problem, you can directly reply from here.

Code Composer Studio™︎

Code Composer Studio forum

CCS/MSP430F5152: compile question