CCS/TIDA-010024: Unable to create Linear Hop Topology

Sourabh,

I am looking into it.

Regards,

AB

Thanks for reply sir,

Please let me know what changes I have to do to achieve liner hop.

Thanks 

Sourabh Vyas

I will be helping AB in this effort to try and speed up the support. I will get back shortly!

Sourabh,

So for the whitelist portion of the code, each node needs to have the following list of extended addresses:

Node 1:

• Node 2 address

Node 2:

• Node 1 address
• Node 3 address

Node 3:

• Node 2 address
• Node 4 address

Node 4:

• Node 3 address

Is this how you set up each individual project? You would need to make sure that you have different images with the proper whitelists set up for each image.

Thanks for reply sir,

This is the same way I did that but I didn't achieve the liner hop topology.

Data Collector/ DCU have only 1st node visible.

Thanks and Regards

Sourabh Vyas

Sourabh,

I do not have the equipment to reproduce due to working from home. 

Do you have any sniffer logs to look at to show that the other 2 nodes are connecting to the devices?

Hi sir,

Due to some issue, I have passed the parts to my other team member.

I will reproduce this and try to send you the logs ASAP.

Thanks and regards

Sourabh Vyas