• Locked Locked
  • Replies 1 reply
  • Subscribers 53 subscribers
  • Views 2019 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Trouble Writing Memory Block at 0x101610 on Page 0 of Length 0x160e: Cannot access memory address 0x100002

Elayaraja Ramp
Prodigy 10 points

Hi,

I am Integrating IBM Rational Test RealTime with CCS 3.1. 

I could able to create .out file in TestRT. That .out file is not loading into CCS IDE for execution...........

And I got error:Trouble Writing Memory Block at 0x101610 on Page 0 of Length 0x160e: Cannot access memory address 0x100002

Please help me to sort it out....

 

Thanks and Regards,

Raja.

  • TI__Guru**** 169754 points

    Raja,

    It seems the code you are generating is trying to allocate memory that is does not exist in your target board or maybe the memory interface of the device is not properly configured via a GEL file. What device are you trying to use?

    Regards,

    Rafael