• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 40 subscribers
  • Views 126 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Evaluation board to start realizing motor control projects

Savino Muscio
Prodigy 10 points
Other Parts Discussed in Thread: LAUNCHXL-F28379D, BOOSTXL-3PHGANINV

Good morning, I wanted to ask for advice on a purchase of an evaluation board to start realizing motor control projects. Card to make prototypes and any firmware upload tools. Being new, I would like something of medium quality, even in terms of cost. It would also be useful if I could get some sample programming code. Thank you in advance to all.

  • 0
    TI__Mastermind 27240 points

    Hello,

    You can look at combination of LAUNCHXL-F28379D and BOOSTXL-3PHGANINV. The first one is a launch pad of C2000 MCU and the second one is a GaN inverter booster pack that will mount on the launch pad. Put together, they can be used to run a motor.

    Example projects are available for this in motor control SDK. You can download it from the web. Hope it helps.