Hi Team,
My medical customer is interested in TI TIDA-01580 board. Can customer purchase or get TIDA-01580 board by themselves? If any concern or question, please let me know. I will talk to customer what TI can support.
Regards,
Takashi Shinde
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Hi Team,
My medical customer is interested in TI TIDA-01580 board. Can customer purchase or get TIDA-01580 board by themselves? If any concern or question, please let me know. I will talk to customer what TI can support.
Regards,
Takashi Shinde
Hello,
Thank you for reaching out.
We don't have these boards available as they were only developed in small numbers for internal testing.
However, the layout and gerber files are available on design folder (link below) which can be used for fabricating the board. There are many customers who have developed their own boards using the gerber files.
https://www.ti.com/tool/TIDA-01580
Regards,
Sanjay R. Pithadia
Hi Sanjey-san,
If possible, would you please let me know our suggested ECG sensor, SpO2 sensor, and PPG sensor vender? The customer would like to contact the vender to buy those.
Regards,
Takashi Shinde
Hello Shinde-san,
The ECG sensor is just metal pad – so no vendor is required. It will be part of the PCB itself. For the PPG and SpO2 sensor vendor, please refer to Page-12 of the design guide on https://www.ti.com/lit/ug/tidudo6b/tidudo6b.pdf (Section 2.3.3)
Regards,
Sanjay R. Pithadia