PSPICE-FOR-TI: Error message:(ORCAP-15098)

Depeng Man

Intellectual 2030 points

Part Number: PSPICE-FOR-TI

Hi team,

Here I had a customer that use PSPICE-FOR-TI and have a error message (ORCAP-15098)

They download ONsemi 2N7002T.lib and click tool--> generate part then generate a F2N7002T (NMOS) and insert to the schematic, here is the error message.

They had download BC847B.lib and click tool-->generate part then insert to the schematic, this simulation is OK.

Do we have something wrong?

I consulted before, but the problem still hasn't been solved

https://e2e.ti.com/support/tools/simulation-hardware-system-design-tools-group/sim-hw-system-design/f/simulation-hardware-system-design-tools-forum/1023692/pspice-for-ti-error-message-orcap-15098?tisearch=e2e-sitesearch&keymatch=orcap%2015098#

How i can simulate snvmbv9f model or how to remove error like PSpice model ERROR(ORPSIM-16592)

over 3 years ago

0 Depeng Man over 3 years ago

TI__Intellectual 2030 points

0 JC Zhu over 3 years ago in reply to Depeng Man

TI__Mastermind 31835 points

Hi Depeng,

This behavior is expected. Please follow this FAQ:

(+) [FAQ] PSPICE-FOR-TI: Why can't I plot more than three signals in PSpice for TI? - Simulation, hardware & system design tools forum - Simulation, hardware & system design tools - TI E2E support forums

If this comes from a TI model, please make a request to get it fixed. I'll send you the instructions.

Regards,
JC

0 Depeng Man over 3 years ago in reply to JC Zhu

TI__Intellectual 2030 points

Hi JC,

I am facing another issue, Once again I will attach an error message here also and the link provided by you,which has no permission to access. this link i will share below.

https://ticsc.service-now.com/now/workspace/agent/record/sn_customerservice_case/a1f16075979e45d482c3348c1253af29

0 JC Zhu over 3 years ago in reply to Depeng Man

TI__Mastermind 31835 points

Hi Depeng,

Right click the schematic and select "make root". After that, you can place the markers:

Thanks,
JC

0 Depeng Man over 3 years ago in reply to JC Zhu

TI__Intellectual 2030 points

Hello JC,

Thank you for your quick reply.

I've conveyed it to my customer.

Have a good day .

James

0 Depeng Man over 3 years ago in reply to Depeng Man

TI__Intellectual 2030 points

Hello,
Good day.
Customer still facing the issue. When I run the model snvmbv9f in PSpice for TI, The output is not getting as per schematic.
Also schematic takes soo much time to run the simulation

Have a good day .

James

0 JC Zhu over 3 years ago in reply to Depeng Man

TI__Mastermind 31835 points

Hi James,

I've transferred this to the product line as the question is about a specific model.

Thanks,
JC

0 Depeng Man over 3 years ago in reply to JC Zhu

TI__Intellectual 2030 points

Hi JC,

Thank you for your reply, but I am facing a different issue. The issue is output is not getting as per schematic, Output remains near to zero. and the link provided is related to place multiple markers.Our design is ready but for simulation it is on pending.

Have a good day .

James

0 Brigitte over 3 years ago in reply to Depeng Man

TI__Guru 63015 points

Hello Depeng,

I am sorry that there was such a long time no answer to this thread. Have you been able to solve your issue in the meantime?

Best regards,
Brigitte