TIDA-00554: Lamp Modification

Hello Eric,

Welcome to the E2E forum and thank you for your interest in DLP technology.

Please allow us until the middle of next week to look into your questions.

Would you mind specifying which telescope reference design you are referring to?

Kind regards,

Austin

Hi, Austin.

Thank you very much for getting back.

1. The telescope design is the stand-off head suggested in here:  https://www.ti.com/lit/pdf/tiducu9

2. The lamp suggestion is coming from here: https://www.ti.com/lit/an/dlpa072/dlpa072.pdf?ts=1648766341705

In addition, it seems that TIDA-00554 is out of stock everywhere. Do you have a date that it will be back in stock? Thanks

Thank you very much.

Regards,

Eric

Hi Eric,

We are discussing internally regarding this issue and will be able to answer your queries by mid of next week.

Your patience is highly appreciated.

Thanks & Regards,

Akhil

Hello Eric,

Thank you for your patience.

Eric Wang said:

1. Are there any alternative lamps to ILT 1088-1, since I am not able to find any in beside the ILT website (while I am in my Australia, and the minimum number is 100).

The description of this lamp is follows:

 Part # 1088-1 (T1 type lamp) International Light Technology. It is glass bulb with Tungsten filament.  Please contact manufacture directly for lower distributor.

The following is catalog from ILT has description of the lamp (Page 26) .  You can use this information to find a substitute lamp.

https://www.intl-lighttech.com/sites/default/files/ilt_sources_catalog.pdf

Eric Wang said:

2. For the telescope reference design, is there anyway to get the suggested lesn A and B? or we have to find some lens manufacturer to make those two

I will get back to you on this by end of the week.

regards,

Vivek