Other Parts Discussed in Thread: MSP430FR5969-SP, ADC128S102QML-SP
Can you provide the example .c and .h files for this reference design? It is mentioned in the design guide that code will be provided but I do not see it on the product page.
I am currently trying to interface an MSP430FR5969-SP to an ADC128S102QML-SP. However, we are not able to get conversion results that make sense. As we send out bytes using the eUSCI SPI peripheral, the SCLK bursts are in 8 cycle increments as opposed to the 16 continuous SCLKs in the ADC's datasheet. An example scope shot is below.
Is there a way to configure the MSP430 such that the eUSCI SPI peripheral can drive the ADC128 without this pause?