TIDA-01064: Customizing the TIDA-01064 design (Schematic Design Review)

Adnan Hussain

Part Number: TIDA-01064
Other Parts Discussed in Thread: TIDA-01574

I would like to change the TIDA-01064 from a single relay design to six controllable relay designs. I am approaching the design changes as below in which the single relay design has been extended to six relays and the design is then combined with the TIDA-01574 design from TI. Please let me know if this is possible.

over 1 year ago

0 Brian Dempsey over 1 year ago

TI__Intellectual 1465 points

Hi Adrian, I am unable to open your attachment unfortunately, but reviewing the designs, you should be able to duplicate this SSR and integrate the second design with no issues. I would just be mindful of the 24VAC transformer VA rating since the TIDA-01064 power and TIDA-01574 power are being taken from the transformer, but I don't suspect there will be any issues there either. Hope this helps!

-Brian

0 Adnan Hussain over 1 year ago in reply to Brian Dempsey

Intellectual 270 points

Dear Brian Dempsey sorry about the file not being accessible before. Please visit the link below to check the design and I would be greatly thankful if you could give any feedback.

drive.google.com/.../view