LM73606QRNPRQ1 design simulation in PSpice not working

Jenil Makwana

Other Parts Discussed in Thread: TINA-TI

LM73606QRNPRQ1

I have been trying to simulate this device using PSPICE on both altium and Tina-TI, however, after connecting all the ports required (based on the webench designer and my own calculations), there's an error that I am not sure what's causing it. Here's a screenshot of the same:

/resized-image/__size/640x480/__key/communityserver-discussions-components-files/234/Screenshot-2023_2D00_07_2D00_15-154603.png

I am also attaching the library I am trying to use for the simulation:/cfs-file/__key/communityserver-discussions-components-files/234/LM73606_5F00_TRANS.LIB

over 1 year ago

0 Rahil Ajani over 1 year ago

TI__Intellectual 2380 points

Hi Jenil,

Please run the PSpice files on PSpice: https://www.ti.com/tool/PSPICE-FOR-TI

Regards,

Rahil

0 Jenil Makwana over 1 year ago

Prodigy 80 points

I have been trying to download it, but it e keeps on asking me to fill personal details, and even after doing it, it doesn’t download but instead starts asking me to fill the details again…

I tried running this on PSPICE by orcad too and it still doesn’t work

0 Rahil Ajani over 1 year ago in reply to Jenil Makwana

TI__Intellectual 2380 points

Hi Jenil,

Please do the following:
Log out of TI web site.
Log into https://www.ti.com directly (not the PSpice registration page).
Go to Account->Personal information and fill in the missing information.
Logout.
Go to www.ti.com/.../PSPICE-FOR-TI and click download.
Follow the instructions on screen.

Regards,

Rahil

0 Jenil Makwana over 1 year ago in reply to Rahil Ajani

Prodigy 80 points

Yeah, that works, I am downloading it. I am just curious as to why it wouldn't work on PSpice I have. I have attached a screenshot of the same, i don't get the right voltage out (it's 0 apparently):

0 Rahil Ajani over 1 year ago in reply to Jenil Makwana

TI__Intellectual 2380 points

Hi Jenil,

Glad to hear it's working for you now. We recommend simulating all our models in PSpice for TI.

Regards,

Rahil

0 Jenil Makwana over 1 year ago in reply to Rahil Ajani

Prodigy 80 points

It is working, I wanted to ask if there’s a quicker way of simulating the transient model or getting a steady state response? With the step function of 20ns for 1.4ms it’s simulating way too slow. Thanks for the help

+1 Rahil Ajani over 1 year ago in reply to Jenil Makwana

TI__Intellectual 2380 points

Hi Jenil,

Transient model in PSpice is unfortunately slow, the only way around it is reducing the number of points (lower accuracy)

Regards,

Rahil

Simulation, hardware & system design tools

Simulation, hardware & system design tools forum

LM73606QRNPRQ1 design simulation in PSpice not working