TIDA-010239: connector details

Muddasani Satyanarayana

Part Number: TIDA-010239

In the attached schematic (TIDMB97), J2 Connector is there ( that will be interfaced with the SECC Board) Can I get the schematic of that SECC Board

In the schematic of that module (J2 Connector is interfaced with SECC Board

Control_Pilot.docx TIDMB97.PDF

6 months ago

0 Kelvin Le THS 5 months ago

TI__Expert 6535 points

Hi Muddasani,

I'm reaching out to our team to see if we can find the SECC schematic to share. Monday is a holiday so there might be a delay in response.

-Kelvin

0 Kelvin Le THS 5 months ago in reply to Kelvin Le THS

TI__Expert 6535 points

Hi Muddasani,

Apologies for the delayed response.

The SECC HW was designed by a 3rd party called Phytec (from germany). We have some links for schematics on the HPGP board, but the SoM and carrier board you will have to request from Phytec.

https://www.phytec.com/

Here is the tool folder for the set-up

https://www.ti.com/tool/AM62-EVSE-DEV-PLATFORM

The User’s guide has a link to the HPGP board schematics

https://www.ti.com/lit/ab/sprac66/sprac66.pdf?ts=1705508869991

Attached is also the hardware manual for Phytec board.

https://fileshare.phytec.com/index.php/s/g7AiHwZnG8ZHCTg

-Kelvin

Simulation, hardware & system design tools

Simulation, hardware & system design tools forum

TIDA-010239: connector details