TIDA-01487: Isolated CAN Flexible Data (FD) Rate Repeater Reference PCB Design

Baljinder Gill

Prodigy 10 points

Part Number: TIDA-01487
Other Parts Discussed in Thread: TCAN1462V-Q1

Reference TIDA-01487 (Isolated CAN Flexible Data (FD) Rate Repeater Reference Design).

Link:TIDA-01487 reference design | TI.com

Hello,

I am looking to get these PCB's manufactured and assembled.

Unfortunately it appears to be missing the drill file data and the pick and place X Y files.

Would you also have the BOM list in a XLSX format please?

Many thanks,

Bal

5 months ago

0 Thomas Mauer 5 months ago

TI__Expert 4480 points

Hi Bal,

Can you work with the Altium Files that we provided with the project? This contains all the schematic and layout data.

Can your manufacturer create the desired manufacturing data out of the Altium Project?

https://www.ti.com/lit/zip/tidrsa7

Regards,

Thomas

0 Thomas Mauer 5 months ago in reply to Thomas Mauer

TI__Expert 4480 points

Please find attached the BOM in Excel format.

TIDA-01487E2(001)_TI-BOM.xlsx

Regards,

Thomas

0 Baljinder Gill 5 months ago in reply to Thomas Mauer

Prodigy 10 points

Hello Thomas,

Thanks for your reply.

Unfortunately I do not have Altium. I have uploaded the Gerber files to the manufacturers website and they have reported the drill file data missing. They would also require the X Y pick and place files to add the components to the PCB.

Thanks,

Bal

0 Thomas Mauer 5 months ago in reply to Baljinder Gill

TI__Expert 4480 points

Hi Bal, I was more thinking: Can your upload the Altium file to your manufacturer website?

Regards,

Thomas

0 Baljinder Gill 5 months ago in reply to Thomas Mauer

Prodigy 10 points

Hi Thomas,

Yes, I just uploaded the files from the TIDCDQ7B.ZIP folder and it is reporting the Drill file not found and Outline not found.

Thanks for the BOM list in excel format.

Bal

0 Thomas Mauer 5 months ago in reply to Baljinder Gill

TI__Expert 4480 points

Hi Bal,

I just generated the Gerber/Drill information as well as the Pick&Place information.

Regards,

Thomas

Pick and Place.zip 3175.GerberNCdrills.zip

0 Baljinder Gill 5 months ago in reply to Thomas Mauer

Prodigy 10 points

Hello Thomas,

Thanks for the files, really appreciated.

Is TCAN1462V-Q1 or an alternative CAN transceiver CAN FD (SIC) compatible with the PCB? The pins appear compatible but pin 5 is connected to a regulated supply in some designs?

Thanks,

Bal

+1 Thomas Mauer 5 months ago in reply to Baljinder Gill

TI__Expert 4480 points

Hi Bal,

Pin 5 seems to be used for "Transceiver I/O level shifting supply voltage (Devices with "V" suffix only)".

If you are using a device w/o the V, it seems that they are pin-to-pin compatible.

I am not sure which device you exactly want to use, but TCAN1462V-Q1 has the "V" and therefore needs some connection on pin 5. As TIDA-01487 has pin 5 left open, you may be able to blue-wire the appropriate connection.

In case you need additional calcification on the CAN transceiver, I suggest that you create a new e2e entry with your question(s) about this part. The new questions is then getting routed directly to the responsible support engineer from the CAN product line.

Regards,
Thomas

0 Baljinder Gill 5 months ago in reply to Thomas Mauer

Prodigy 10 points

Thanks for clarifying Thomas,

I believe the non suffix V part will be okay.

Thanks for your support.

Bal

Simulation, hardware & system design tools

Simulation, hardware & system design tools forum

TIDA-01487: Isolated CAN Flexible Data (FD) Rate Repeater Reference PCB Design