• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 40 subscribers
  • Views 119 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TIDA-080000: Can I change FPGA to other temperature device?

TAKAHIRO MARUYAMA
Prodigy 10 points
Part Number: TIDA-080000

Hi Experts,

FPGA "XC7Z020-1CLG484I" is used in schematic of TIDA-080000.

but, I would like to use "XC7Z020-1CLG484C".

Does it work properly if I change  "XC7Z020-1CLG484I" to "XC7Z020-1CLG484C" in schematic of TIDA-080000?

Regards,

Takahiro.

  • +1
    TI__Mastermind 23040 points

    Hello Takahiro-san,

    Welcome to DLP forum and thank you for your interest in DLP technology.

     We suggest that you use the FPGA part as listed in the reference design. We have validated firmware and system with this specific part.

    While there is a chance the firmware might work in some conditions with XC7Z020-1CLG484C, we can not confirm that it will work and in addition, we will not be able to provide technical support. 

    regards,

    Vivek