I drew schematic to see output of boost converter, according to the datasheet Vref must be 500mV and output voltage should be 5V as arranged. But I think FB is wrong, it gives wrong output voltage.
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
I drew schematic to see output of boost converter, according to the datasheet Vref must be 500mV and output voltage should be 5V as arranged. But I think FB is wrong, it gives wrong output voltage.
Hi Dogan,
Can I have your simulation file?
Best Regards,
Travis
Hi Rumeysa,
According to TI policy, access to cloud file sharing sites is restricted. So I configured the TLV61070A PSPICE model as your schematic and it works fine.
Best Regards,
Travis
Hi Travis,
I didn't get where I did wrong but I'm glad its worked fine.
Thank you.