• State TI Thinks Resolved
  • +1 person also asked this people also asked this
  • Locked Locked
  • Replies 2 replies
  • Answers 1 answer
  • Subscribers 41 subscribers
  • Views 78 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

UCC25600: Active bridge rectifier controller

Hussam Hayrab
Prodigy 30 points
Part Number: UCC25600

Tool/software:

Hello

I have this design of secondary side of LLC converter and I need an active bridge rectifier controller for these rectifier MOSFETs.Can you suggest any controllers?

Not: The final output of the secondary side is 400V 

Thanks.

  • 0
    TI__Guru 72635 points

    Hello,

    I am reviewing your inquiry and will get back to you shortly.

    Regards,

  • 0 in reply to Mike O'
    TI__Guru 72635 points

    Hello,

    You should be able to drive the H bridge with two gate drivers and two, 2 to 1 gate drive transformers.

    The following is a functionally schematic on how you would control the H Bridge with gate drive transformers and gate drivers.

    Thank you for interest in Texas Instruments (TI) products.  If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

    Regards,