Request A TINA Spice Model For The UCC27531DBV Single-Gate Driver

Hi William,

I have added this to the TINA-TI translation queue and will get back to you as soon as it is completed.

Best regards,

Hi Nikhil,

at the website of the UCC27531 gate driver I see two simulation models, one for use with TINA and the other one a PSPICE model.

Unfortunately the PSpice Model is encrypted and I can't add it to my LTSpice simulation. 

It seems many of the Pspice model of TI parts are encrypted. How can they be used then?

Thanks a lot,

Dominik

Dominik,

The encrypted PSpice models may be used in PSpice version 15.7 or higher. We also provide TINA models for most of our power products that may be used in TI's free simulator TINA-TI.

If you require a different simulator, you may be able to obtain the unencrypted PSpice model. If you have a direct TI support contact, they may request the model for you. If not, please refer to the following post for more information.

http://e2e.ti.com/support/development_tools/webench_design_center/f/234/t/36943.aspx

Please note that an NDA may be required to obtain an unencrypted PSpice model.

Britt