TPS40170-EP PSPICE model

JoeY_937

Other Parts Discussed in Thread: TPS40170

Hi - Our company uses Altium 13 for our schematic capture and PCB layout. The part TPS40170 has a PSPICE model on its website but it is only for Cadence. Could I either get an encrypted version that works with Altium or get a version that is not encrypted? Thanks

over 9 years ago

0 Amy Schnoor over 9 years ago

TI__Mastermind 18285 points

Joey,

I have moved your post to the correct forum and someone should answer your question.

0 JohnTucker over 9 years ago in reply to Amy Schnoor

TI__Guru**** 191445 points

I have moved it again to the real correct forum...

0 Nikhil Gupta (Product Folder Models) over 9 years ago in reply to JohnTucker

TI__Mastermind 39210 points

Joey,

Are you using Altium for Spice simulation or for Schematic & Layout or for both? If you need the unencrypyed model, please get in touch with your local field contact.

Thanks,

0 JoeY_937 over 9 years ago in reply to Nikhil Gupta (Product Folder Models)

Prodigy 70 points

Hi Nikhil - We use Altium for schematic and layout.

Thanks,

Joe

0 Nikhil Gupta (Product Folder Models) over 9 years ago in reply to JoeY_937

TI__Mastermind 39210 points

Hi Joe,

We have a very easy way to create Schematics and Board Layout in Altium. If you go to the TPS40170 product folder, you will see a WEBENCH Panel on the right where you can create a custom design for your system. Once you create this design, you can go through an optional step to optimize your design for key needs like Efficiency, Cost or Size. Once you have your final solution, you can click on the "Export" button on the top which will allow you to download the schematic and board layout for your custom design into popular CAD formats including Altium.

Please give it a shot and let me know if you need any further assistance.

Thanks,

Simulation, hardware & system design tools

Simulation, hardware & system design tools forum

TPS40170-EP PSPICE model