TINA-TI simulation model for LM25017 & LP38502

Genius 4185 points

Other Parts Discussed in Thread: LM25017, TINA-TI, LM5017

Hi,

My customer would like to simulate LM25017 & LP38502　using TINA-TI.

I found pspice models for the two in Website, but the model was encrypted.

Could you provide us the TINA-TI models for LM25017 & LP38502?

Regards,

0 Lakshmi Holehonnur over 9 years ago

Hi Go,

The model for LM25017 is the same as LM5017. TINA-TI model for LM5017 can be found here - http://www.ti.com/product/LM5017/toolssoftware\

For LP38502, I am attaching the unecrypted model here. You can import it into TINA by following the steps outlined in this document - https://e2e.ti.com/support/development_tools/webench_design_center/w/faq/3059.importing-unencrypted-pspice-models-into-tina-ti

Please let me know if you have any questions.

Thanks,

Lakshmi

Simulation, hardware & system design tools forum