TINA Simulation Model for LM2700

T. Nguyen

Intellectual 340 points

Other Parts Discussed in Thread: LM2700, TINA-TI

Does anyone know where can I get the TINA Simulation Model for LM2700?

over 9 years ago

0 Britt Brooks - Online Design Tools over 9 years ago

TI__Mastermind 41310 points

T.,

We do not currently have a PSpice or TINA-TI model for the LM2700.

The device is enabled in WEBENCH® Power Designer.

0 T. Nguyen over 9 years ago in reply to Britt Brooks - Online Design Tools

Intellectual 340 points

Hi Britt Brooks,

I need to run TINA_TI simulation for my circuit, which include LM2700, is an apart of my entire circuit design.
If possible, may I know why there is no TINA_TI model for LM2700?

T. Nguyen

0 Nikhil Gupta (Product Folder Models) over 9 years ago in reply to T. Nguyen

TI__Mastermind 39210 points

Hi T.,

This is an old device and hence we do not have a model for it. We have models for several other Boost devices which you could potentially use for your application. Check out all the available spice models in the link below. Type 'TINA' in the search box to filter out all the TINA-TI models available.

Thanks,

0 T. Nguyen over 9 years ago in reply to Nikhil Gupta (Product Folder Models)

Intellectual 340 points

Hi Nikhil Gupta,

Thanks for confirm of LM2700 model and options.

T. Nguyen

0 T. Nguyen over 9 years ago in reply to Nikhil Gupta (Product Folder Models)

Intellectual 340 points

Hi Nikhil,

I go to the link "www.ti.com/spicerack" you give me, I get the following error message,

[FaultEvent fault=[RPC Fault faultString="Send failed" faultCode="Client.Error.MessageSend" faultDetail="Channel.Connect.Failed error NetConnection.Call.Failed: HTTP: Status 500: url: 'http://webench.ti.com/wb5/messagebroker/amf'"] messageId="B15CF406-BC1B-F5D7-E4A8-936724180CD5" type="fault" bubbles=false cancelable=true eventPhase=2]

0 Nikhil Gupta (Product Folder Models) over 9 years ago in reply to T. Nguyen

TI__Mastermind 39210 points

I have seen that from time to time. Please try again. It should go away.

0 T. Nguyen over 9 years ago in reply to Nikhil Gupta (Product Folder Models)

Intellectual 340 points

Hi Nikhil,

Thanks it works!!!!!!!

Simulation, hardware & system design tools

Simulation, hardware & system design tools forum

TINA Simulation Model for LM2700