Importing pspice library into Tina-TI (stw69n65m5)

Andrea Cavazzoni

Other Parts Discussed in Thread: TINA-TI, UCC28950

Tool/software: TINA-TI or Spice Models

en.stw69n65m5_spice.zipHello,

I download from ST website the pspice model of the swt69n65m5 MOS N-CHAN. I want to use it iun a circuit with UCC28950, but I cannot import the library and I cannot select the device. How can I proceed? I attach the zip file with the MOSFET libraries.

Thank you.

Best regards,

over 8 years ago

0 Nikhil Gupta (Product Folder Models) over 8 years ago

TI__Mastermind 39210 points

Hi Andrea,

The documentation to import an external model to TINA-TI is shown here:

http://www.ti.com/lit/pdf/slva527

We also have an extensive video training series to guide you though this process (refer to Video 1.9 specifically for this question)

https://training.ti.com/tina-ti-video-training-series

0 Britt Brooks - Online Design Tools over 8 years ago

TI__Mastermind 41310 points

Andrea,

You might also want to choose which model in the .zip file that you want to import. ST provides a guide on what each model should be used for and which model would address your concerns. There are several models available in the .zip file provided.

Simulation, hardware & system design tools

Simulation, hardware & system design tools forum

Importing pspice library into Tina-TI (stw69n65m5)

http://www.ti.com/lit/pdf/slva527

https://training.ti.com/tina-ti-video-training-series