TINA/Spice/LM26420-Q1: Spice/LM26420-Q1 Average Model

Zhang Yuxi

Part Number: LM26420-Q1
Other Parts Discussed in Thread: TINA-TI,

Tool/software: TINA-TI or Spice Models

Why TI official website doesn't provide the LM26420-Q1 average model?

I had try used the WEBENCH to get the loop response curve, but I can't add new passive component in the schematic to make it conform to my actual apply, so the simualtion results is not I needed.

The WEBENCH is very slow, why not provide a local install version?

over 7 years ago

0 Nikhil Gupta (Product Folder Models) over 7 years ago

TI__Mastermind 39210 points

Hi Zhang,

We try to provide evaluation tools for many of our devices. In this case, WEBENCH should be your primary tool. I see from your post that you are having issues changing the BOM components. I verified and this should not be an issue. You should be able to select alternate components for the 2 channels. What is the exact issue that you are having with WEBENCH? Can you provide more details so we can help you out?

0 Nikhil Gupta (Product Folder Models) over 7 years ago in reply to Nikhil Gupta (Product Folder Models)

TI__Mastermind 39210 points

Hi Zhang,

We have not heard back from you. I am hoping that your issue has been resolved. If not, please feel free to post the additional details requested in the previous post so we can look into it.

0 Zhang Yuxi over 7 years ago in reply to Nikhil Gupta (Product Folder Models)

Prodigy 70 points

Hi Nikhil Gupta ,

I am not clear how to change the schematics in webench still. Below is my L26420X transient simulation schematics,since the ti website not provide average modle, so I can't get the loop respose in pspice.

Cloud you edit the schematic in webench and share to me?

0 Nikhil Gupta (Product Folder Models) over 7 years ago in reply to Zhang Yuxi

TI__Mastermind 39210 points

Hi Zhang,

You can refer to the following help documentation on how to change the BOM components in WEBENCH.

https://webench.ti.com/help/#t=PowerDesigner%2FBOM%2FBOM.htm

https://webench.ti.com/help/#t=PowerDesigner%2FSchematic%2FSchematic.htm

The TI E2E™ design support forums will undergo maintenance from July 11 to July 13. If you need design support during this time, open a new support request with our customer support center.

Simulation, hardware & system design tools

Simulation, hardware & system design tools forum

TINA/Spice/LM26420-Q1: Spice/LM26420-Q1 Average Model