TIDA-01518: What kind of water probe do you use?

Polly Chung1

Part Number: TIDA-01518

Dear team,

My customer want to know what kind of water probe do you use in TIDA-01518, could you please let us know? Do you have part number? Thank you.

Best Regards,

Polly

over 5 years ago

0 Brian Dempsey over 5 years ago

TI__Intellectual 1455 points

Hi Polly,

You can find the part details in the following document. The connector used is a molex friction lock 2 pin header.

I hope this Helps!

-Brian

0 John Wang84 over 5 years ago in reply to Brian Dempsey

Prodigy 10 points

Hi Brian
I am a hardware engineer from UBNT. Whta kind of wire did you use for probe water on EVB? Is it a wrapping wire? Is any wrapping wire could be probe water?
Thanks

0 Brian Dempsey over 5 years ago in reply to John Wang84

TI__Intellectual 1455 points

Hi John,

We just used 2 female-to-male jumper wires. Any wrapped wire should work just fine.

-Brian

Simulation, hardware & system design tools

Simulation, hardware & system design tools forum

TIDA-01518: What kind of water probe do you use?