This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TINA/Spice/TLV4379: Berkley 3F5 SPICE model

Part Number: TLV4379
Other Parts Discussed in Thread: TINA-TI, , OPA4379, TLV379, LMP2234, TLV4333

Tool/software: TINA-TI or Spice Models

Hello,

We are planning to use TLV4379 op amp in a new design, mainly because of its very low quiecent current and low supply voltage.

We are using Labcenter Electronic's  Proteus Design Suite 8 for schematic capture, simulation, firmware IDE and PCB layout.

Question: Can TI deliver a Berkley 3F5 SPICE model for TLV4379?

We are looking forward from hearing from you.

Best regards,

Halvard

  • Hi Halvard,

    We'll be evaluating your inquiry. There will be no guarantee that we will be able to provide one, but we will let you know.

    Herman
  • Hello Herman,

    Thank you very much!

    Best regards,

    Halvard

  • Hi Halvard,

    Unfortunately, after our further evaluation by our internal team, we don't plan to generate a spice model for this part. Sorry about that.

    Herman
  • Hi Herman,
    Thank you for your prompt reply. Using TINA TI v9, I found a basic design utilizing the TLV379 having the spice model. We have run circuit design simulations already. The results were as expected. This morning I got a nice email from Gustaf Falk Olson, Texas Instruments FAE, in Sweden. He advises us to consider OPA4379, LMP2234 and TLV4333 on the basis of certain parameters.
    Herman, we are grateful for the outstanding service of Texas Instruments!
    Best regards,
    Halvard Gilbu
    Senior R&D engineer
    Vestfold Audio