HI Team,
My customer would design an application transforming from -48V to 12V, with isolation protection and it seems PMP20850 also fits the spec. How to modify the design such that it can output 12V? Thanks.
Best regards,
Andy Chu
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
HI Team,
My customer would design an application transforming from -48V to 12V, with isolation protection and it seems PMP20850 also fits the spec. How to modify the design such that it can output 12V? Thanks.
Best regards,
Andy Chu
HI Andy,
The more important specification is the output power level, what does your customer need?
Once that is determined, if it is the same as PMP20850 then you might only have to change the transformer turns ratio.
I am also going to loop in the original designer.
Thanks,
Robert
Hi Andy,
There might be another design that is closer to your requirements. I suggest using the TI reference designs quick search tool to find one that matches your requirements. Here is a link to the search tool.
thanks,
Brian