WEBENCH® Tools/UCC28700-Q1: Unencrypted model of UCC28700-Q1

Oliver Kim7

Part Number: UCC28700-Q1
Other Parts Discussed in Thread: UCC28700, TINA-TI

Tool/software: WEBENCH® Design Tools

Hello team,

I am FAE in TI.

It seems that UCC28700-Q1 doesn't work in other simulation tool.

Can I get unencrypted model of UCC28700-Q1? I may work in other tool.

My customer has NDA relationship with TI, could you please send it through my e-mail? oliver.kim@ti.com

Regards,

Oliver Kim

0 Mike O' over 4 years ago

Hello

There is a Spice model and a Tina model. Please note that the PSpice model will not run in Tina.

Could you please double check to make sure you are using the correct model?

Regards,

0 Oliver Kim7 over 4 years ago in reply to Mike O'

Yes I did the correct one.

There is UCC28700 pspice transient model and TINA-TI transient spice model.

Of course TINA-TI transient spice model works in TINA,

But UCC28700 pspice transient model doesn't work in other tool such as OrCAD, MC12 etc.

Based on my experience, every unencrypted model doesn't have any issue in other tool.

That's why I request UCC28700 unencrypted pspice transient model to support my customer in other tool and customer have to simulate it in OrCAD.

Thank you.

Regards,

Oliver Kim

0 Mike O' over 4 years ago in reply to Oliver Kim7

Hello Oliver,

I will send a follow up email with the unencrypted model. Just make sure your customer has an NDA signed with TI.

Regards,

Simulation, hardware & system design tools forum