• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 38 subscribers
  • Views 273 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Original question:

TIDA-00951: problems with BOM components

TIDA-00951: component issue

michael coletti
Intellectual 835 points

Part Number: TIDA-00951

Hi,

my manufacturer sent me this

can you please suggest other component?

Best Regards

Michael

  • 0
    TI__Expert 6520 points

    Hi, Michael

    I think this issue happens because the designer increased the diodes current rating, but not change the PCB file.

    Could you solder the diodes above the PAD, without through hole?

    Otherwise, you could try with some smaller current shottky diode on this position.