Simulation, hardware & system design tools

Simulation, hardware & system design tools forum

WEBENCH® Tools/CSD95377Q4M: Simulation, PSpice model

Marcin Kwiatkowski

Prodigy 20 points

Part Number: CSD95377Q4M

Tool/software: WEBENCH® Design Tools

Hello,

I, m Students. I downloaded the PSpice model. An error occurred while running the simulation "Not enough nodes eee8c5c7a2bc4b01f045f303678664e7916da0bae22e8cb0bba041dd67c69ce448ea70148a9ac1670c8926c1ac5057c8ccfcd77bf8732 c711f176edd7862e5bce04360421c9d253add32d62cc608b706b807646b8037183a340e7fb24bab0183e0ea50952947435f8e681f756186ef952bc1219e ".

How can I fix this error?

Sincerely

Marcin K

over 5 years ago

0 Qian Chen over 5 years ago

TI__Mastermind 24075 points

Hi Marcin,

Our model was verified before we release it.

Most likey the issue is related to simulation schematic, setting or others.

It is difficult for us to debug such kind of issue. Can you check with someone who is familiar with pspice simulation?

Thanks

Qian

0 Marcin Kwiatkowski over 5 years ago in reply to Qian Chen

Prodigy 20 points

Hello Qia,

The problem is probably that the available source code is encrypted.

Here is a similar problem.

https://e2e.ti.com/support/tools/sim-hw-system-design/f/234/t/241067

0 Qian Chen over 5 years ago in reply to Marcin Kwiatkowski

TI__Mastermind 24075 points

Hi Marcin,

Sorry, we can not provide unencrypted model of this part.

Thanks

Qian