• State Resolved
  • Locked Locked
  • Replies 2 replies
  • Subscribers 39 subscribers
  • Views 389 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Original question:

WEBENCH® Tools: WeBench missing coil designer

WEBENCH® Tools: WEBENCH® Design Tools coil designer

KyeongJae Lee
Prodigy 10 points

Tool/software: WEBENCH® Design Tools

Dear TI technical teams,

I'm trying to import cad design into Eagle CAD using TI WEBENCH Design Tools coil designer. The problem is the generated CAD files only include a "board" file without a "schematic" file. The "readme.txt" that included in the generated files mentioned that a schematic file also included as below figure. Could you check this issue? 

Thank you for your assistance.

Regards,

Kyeong Jae.

  • 0
    Genius 4910 points

    Hi Kyeong .

    We have asked concerned expertise to look into the issue and will get back to you on this soon.

    Thanks and Regards,

    Atul

  • 0
    TI__Expert 3482 points

    Kyeong Jae,

    The readme file is general for the EAGLE export.

    The schematic import section in the readme only applies when an export consists of a schematic.

    Since Coil Designer only designs a coil on a board, it only exports a board file. 

    Regards,

    Alfred