PSpice for TI Update Issues

Kadeem Samuel

Other Parts Discussed in Thread: CD74HC365

When updating to the latest version of PSpice for TI, upon running the simulation, I get the issue "ERROR(ORPSIM-15108): Subcircuit CD74HC365 used by X_U18 is undefined" for all different op-amps that I have in my simulation. This issue occurs when I try other op-amps as well.

over 4 years ago

0 John Miller - Sensing over 4 years ago

TI__Mastermind 33905 points

Kadeem,

Thank you for your interest in Pspice for TI. We are sorry to hear of the problems you are experiencing with the tool.

Would you please archive the project/schematic that is showing the error and attach it to this thread?

You can archive a Pspice for TI project by selecting the top folder (Design Resources) in the left-hand panel and selecting File/Archive Project.

In the subsequent pop-up check all the boxes except Output files, and attach the resulting zip file to this tread.

Once we review the project, we will provide feedback.

Thanks again.

John

0 Kadeem Samuel over 4 years ago in reply to John Miller - Sensing

TI__Genius 14100 points

John,

Attached is the archive.

Thanks,

KadeemArchive.zip

0 John Miller - Sensing over 4 years ago in reply to Kadeem Samuel

TI__Mastermind 33905 points

Thank you for uploading the project Kadeem.
I will take a look and get back to you with some feedback by tomorrow.

Regards,
John

0 John Miller - Sensing over 4 years ago in reply to John Miller - Sensing

TI__Mastermind 33905 points

Kadeem,

There are a couple of things going on in your circuit.

First, the shared nodes between the different pages in your schematic need to be connected using Off Page Connectors.
They are available in the Place menu. You can find more details by searching "Pspice Off-Page Connector".

The other item has to do with your update of Pspice for TI. I will reply to this in a separate message.

Regards,
John

Simulation, hardware & system design tools

Simulation, hardware & system design tools forum

PSpice for TI Update Issues