WEBENCH® Tools/TPS65261-1: Question about WEBENCH simulation availability

Yuta Nishie

Part Number: TPS65261-1

Tool/software: WEBENCH® Design Tools

Hi,

I think the TPS65261-1 was supported the previous WEBENCH, but the new WEBENCH doesn't seem to support it.
Our customer hope that this device will be supported new WEBENCH.
Can you make the TPS65261-1 simulation available on the new WEBENCH?
Or is there a product with the similar specifications(input voltage range, output current, 3ch output, etc.) as TPS65261-1 that has been already supported on the new WEBENCH?

Best Regards,

Yuta Nishie

over 3 years ago

0 Umayal Ramanathan over 3 years ago

TI__Expert 4930 points

Hi Yuta,

Currently WEBENCH does not support multi-rail designs.

I am moving this post to expert group for further support.

Thanks and Regards,

Umayal

0 Zhao Ma over 3 years ago

TI__Genius 15135 points

Hi, Yuta

As Umayal said, WEBENCH does not support multi-rail designs.

As a best practice, suggest to start your design based on EVM reference design which had been validated.

Generally speaking, you only need to change the feedback divider resistor for output setting.

0 Yuta Nishie over 3 years ago in reply to Zhao Ma

Genius 3200 points

Hi, Zhao

I understand.

Do you have any plan that WEBENCH support multi-rail designs?

Best regards,

Yuta

0 Zhao Ma over 3 years ago in reply to Yuta Nishie

TI__Genius 15135 points

Hi, Yuta

As i know, there is no plan to build WEBENCH for multi-rail devices.

Simulation, hardware & system design tools

Simulation, hardware & system design tools forum

WEBENCH® Tools/TPS65261-1: Question about WEBENCH simulation availability