Other Parts Discussed in Thread: LM3410
Tool/software: WEBENCH® Design Tools
Hello
Pleas help me, I am bought your EVB LM3410XSD in order to implement that solution in my circle.
I made several adjustment on EVB, i assembled two my LEDs - Omron, GW CSHPM1.PM-LSLU-XX51-1
Disconnect R2 (in final design i will use internal pull down in MCU).
My problem, once i connect DIMM (yellow wire) pin to GND (Black wire) the LED is still light (weak, but still on) What's the problem?
while i connect DIMM (Yelow wire) pin to VCC (red wire) , LED light with wanted power, this is OK.
Please advise, what I mike wrong?
Thank you
Ilya