Hi TI team,
When we adopt this design, we found the the transformer T1 is reversed in this design. The pin 1, 2, 3 of T1 should be connected to U2, not secondary side.
please correct, thank you.
Tom
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Hi TI team,
When we adopt this design, we found the the transformer T1 is reversed in this design. The pin 1, 2, 3 of T1 should be connected to U2, not secondary side.
please correct, thank you.
Tom