CC2640R2F-Q1: PCB Layout Design and BLE stack support

chandra n

Part Number: CC2640R2F-Q1
Other Parts Discussed in Thread: CC2541-Q1

Hi Team,

We wanted to build the product for the Automotive project where we wanted to use the CC2640R2F-Q1 IC as BLE. So we are looking for your help in designing the PCB layout and understanding the BLE stack operation.

Which Bluetooth version it support and what is the support we get from BLE stack integration with the application.

Wanted to know the difference between CC2640R2F-Q1 Vs CC2541-Q1?

Please let us know a suitable time to schedule a meeting so that we can discuss this with the technical team and take the decision.

Thanks for your help in advance.

Thanks,

Chandra

over 2 years ago

0 Clément over 2 years ago

TI__Guru* 94218 points

Hi Chandra,

chandra n said:
we are looking for your help in designing the PCB layout

You may want to review https://www.ti.com/lit/swra640 and other designs, like the LAUNCHXL-CC2640R2.

chandra n said:
Which Bluetooth version it support and what is the support we get from BLE stack integration with the application.

There are two BLEStacks available on CC2640R2 devices - the BLEStack, with BLE 4.2 features and the BLE5Stack with BLE 5.0 features.

chandra n said:
what is the support we get from BLE stack integration with the application

I would recommend to start by reviewing the resources we have on dev.ti.com. You'll find all the required links to get started with this device.

chandra n said:
Wanted to know the difference between CC2640R2F-Q1 Vs CC2541-Q1?

I would recommend this thread.

I hope this will help,

Best regards,

Bluetooth®︎

Bluetooth forum

CC2640R2F-Q1: PCB Layout Design and BLE stack support