Other Parts Discussed in Thread: ENERGYTRACE, LAUNCHXL-CC26X2R1, TMDSEMU110-ETH, , TMDSEMU110-U
Hello,
We would like to use EnergyTrace on a custom board that uses a 3.3V power supply but converts it down to 1.8V to power a CC2642.
So we would like to supply and measure the current on the 3.3V but communicate via JTAG with 1.8V (in order not to damage the 1.8V-powered CC2642).
Is it possible ?
We have a XDS110 and LAUNCHXL-CC26X2R1.
Thank you.
Regards,
Victor Tolosana