Hi
Im working with Basic_BLE peripheral code. I am facing an issue with pairing. The pairing is currently done with a default passkey. Even after typing a faulty passkey it is printing pair success.
NOTE:
In app_pairing.c , case BLEAPPUTIL_PAIRING_STATE_COMPLETE: ,under this mask
Can you help me with where I can get a pair/aunthetication fail passkey.
Hello Krishna,
I apologize for the delay, I have tried to reproduce the issue but I have not been able too. When I input the incorrect password my device disconnects from the cc2340. My setting are set the following way.
To change the password you will need to set it on the bcomdef.h file.
Another helpful resource would be in the user guide.
Kind Regards,
Rogelio
Hi Rogelio
I think you didnt understand my query.
I'm printing pairing failed message in BLEAPPUTIL_PAIRING_STATE_COMPLETE this mask in app_pairing.c , but it is not printing .
After which I tried with BLEAPPUTIL_AUTHENTICATION_FAILURE_EVT mask in app_connection.c , here also it was not taking
May I know where I can print a passkey fail or pairing fail message
Hi Krishna,
I understand your query now. I added this in pairing state complete to print out if it passed or failed.
Here is the code for easy copy and pasting,
if (((BLEAppUtil_PairStateData_t *)pMsgData)->status == 0){
MenuModule_printf(APP_MENU_PAIRING_EVENT, 0, "Pairing Passed");
}
else{
MenuModule_printf(APP_MENU_PAIRING_EVENT, 0, "Pairing Failed");
}
Kind Regards,
Rogelio