CC2340R2: is it possible to customize the advertising packet via SysConfig?

Lenio Cacula

Part Number: CC2340R2
Other Parts Discussed in Thread: SYSCONFIG

Tool/software:

It appears Sys Config places certain information i.e., the device name, UUID, etc. – in certain locations in the advertisement and scan response packets. We would like to set these packets to the data that is used in the customer application. However It looks like we will have to include the ti_ble_config.c/h files in the build by using Sys Config and modify these files manually. Is this the recommended way to customize the advertising and scan response data? Or is there a way it can be done using Sys Config?

Thank you!

18 days ago

0 Ivan 16 days ago

TI__Intellectual 1410 points

Hi Lenio,

Thanks for reaching out.

You are able to do this through SysConfig - Advertising data and response data OR you can compile the project once you've disable generation for the BLE SysConfig files and modify it through there.

Regards

Ivan

0 Lenio Cacula 16 days ago in reply to Ivan

TI__Genius 16110 points

Can the order of the advertisement fields be configured? Example below:

Field

Advertising Flags

16-bit UUID

Complete Local Name

Scan Response Data:

Field

Service Data

Manufacturer Specific Data

Appearance Data

0 Lenio Cacula 12 days ago in reply to Lenio Cacula

TI__Genius 16110 points

Any updates?

0 Ivan 6 days ago in reply to Lenio Cacula

TI__Intellectual 1410 points

Hi Lenio,

Sorry for the delay. I was out of the office last week.

Can you please explain the use case for this, what are you trying to accomplish?

Regards,

Ivan

0 David 6 days ago in reply to Lenio Cacula

TI__Genius 9255 points

Hello Lenio,

The Advertisement report and Scan response are two different structures from the peripheral perspective, that you can configure through SysConfig and that you can see modified in ti_ble_config.c. As Ivan has mentioned, would be great to understand your use case better to further assist you.

BR,

David.

0 Lenio Cacula 6 days ago in reply to David

TI__Genius 16110 points

In my post of August 9th, I show the order of the advertisement fields and the scan response data.

Advertisement: Advertising Flags → 16-bit UUID → Local Name

Scan Response: Service Data → Manufacturer Data → Appearance Data

Can those be configured in this specific order? I could not find a way to do it in SysConfig.

Thanks!

+1 Ivan 5 days ago in reply to Lenio Cacula

TI__Intellectual 1410 points

Hi Lenio,

Unfortunately no, these are standardize by the spec.

Regards,

Ivan

Bluetooth®︎

Bluetooth forum

CC2340R2: is it possible to customize the advertising packet via SysConfig?