Bluetopia 4.0.2.2 on STM32F407G-DISC1 /CC256XQFNEM with Coocox

Paolo Martinetti

Expert 2730 points

Other Parts Discussed in Thread: CC256XQFNEM, CC2564MODNEM, CC2564MODAEM, CC256XSTBTBLESW

Hi,

I have a project developed in Coocox for STM32F407G-DISC1 /CC256XQFNEM demo boards.

I'd like to know how to use (compile and link) Bluetopia 4.0.2.2 api. Anyone knows?

Thanks In advance

Paolo

over 8 years ago

0 Vihang Parmar over 8 years ago

TI__Mastermind 29250 points

Hi Paolo,

In order to use the CC256XQFNEM or CC2564MODNEM or CC2564MODAEM with the STM32F4 Discovery board, you need to use the CC256XEM-STADAPT. The HW user guide for this board can be found here.

Regarding SW modifications to the CC256XSTBTBLESW SDK, please refer to the Enable_STM32_Discovery.pdf file in the /NoOS/Documentation directory of the SDK installation. IAR and Keil uVision are the officially supported IDEs in this SDK, but the same rules would apply for Coocox.

Best regards,

Vihang

0 Paolo Martinetti over 8 years ago in reply to Vihang Parmar

Expert 2730 points

I solved! Thank you so much!

Bluetooth®︎

Bluetooth forum

Bluetopia 4.0.2.2 on STM32F407G-DISC1 /CC256XQFNEM with Coocox