Read / Write more than 1 byte in simpleBLEPeripheral and simpleBLECentral project

shivalinga shastri salimath

What are the necessary changes to be performed to read / write more than 1 byte of data in simpleBLEPeripheral and simpleBLECentral projects

over 9 years ago

0 Tim C over 9 years ago

TI__Mastermind 34660 points

There is an example of this in the simpleBLEPeripheral project in the five-byte Simple Profile Characteristic 5 of the simple gatt profile.

For more information see the GATT profile section of the software developer's guide (www.ti.com/.../swru393) or the simpleLink academy which contains a tutorial of creating a profile (software-dl.ti.com/.../overview.html).

0 shivalinga shastri salimath over 9 years ago in reply to Tim C

Intellectual 330 points

I have made changes on central and peripheral side to read and/or write more than 1 byte by reading swru393. On central side i got these prints, after these prints central halts. Does any body have any idea?

Sample Log output

BLE Central
0xB0B448EBB182
Initialized
Discovering...
Devices Found 1
<- To Select
Device 1
0xB0B448EBB282
Connecting
0xB0B448EBB282
Connected
0xB0B448EBB282
MTU Size: 23
Param Update: 0

0 shivalinga shastri salimath over 9 years ago in reply to Tim C

Intellectual 330 points

Tim, Is your second link / URL correct

0 Tim C over 9 years ago in reply to shivalinga shastri salimath

TI__Mastermind 34660 points

software-dl.ti.com/.../overview.html

Bluetooth®︎

Bluetooth forum

Read / Write more than 1 byte in simpleBLEPeripheral and simpleBLECentral project