Hi all,
I got two RF430CL330HTB Target Boards, unpacked the first one over an ESD table, connected to the MSP430FR5739 Experimenter Board running the RF430CL330H_Example code and my Nexus 4 is unable to detect anything. Tried the other board with the same procedure and it works.
I can successfully read and write the undetectable board through I2C interface but the board just simply don't gets an RF wakeup. On the other hand, the other board is working fine with similar register configurations.
What could be the cause of this problem? I highly appreciate possible assistance and insight over the issue.
Thanks and Regards,
Hammad