• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 15 subscribers
  • Views 273 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Original question:

TRPGR30ATGC: How to read UID of TRPGR30ATGC and TRPGR40ATGC

TRPGR30ATGC: Questions for transponder

Koichiro Tashiro
Mastermind 21590 points
Part Number: TRPGR30ATGC
Other Parts Discussed in Thread: MRD2EVM, , TRPGP40ATGC

Hi,

The original thread owner is my customer and I got below information from him.

Background of the question:
Customer wants to make LF reader/writer (not only GUI) which is independent of TI tool (MRD2EVM).
The reader/writer supports ISO11784/5 and ISO14223.

Questions:
Customer wants to know below information for TRPGR30ATGC and TRPGR40ATGC.
- Supported ISO standard commands
- data format
- any other information required to make reader/writer for these transponders

Are these available?

Thanks and regards,
Koichiro Tashiro

  • 0
    TI__Intellectual 990 points

    Tashiro,

    The TRPGR30ATGC and the TRPGP40ATGC support the charge only command to read the ID number of the transponder.

    The response format of the transponder is included in the reference guide of the MRD2 reader.

    I will send you also a separate message to the data format.

    Best regards,

    Uli